기기를 수리하세요 커뮤니티 상점

모델 A1312 / Mid 2010 / 3.2 GHz Core i3 또는 2.8 & 3.6 GHz Core i5 또는 2.93 GHz Core i7, ID iMac11,3

383 질문 전체 보기

옵션

Screen stays dark after a white flash.BUT I have access through netwok

Hi!

I have a 2010 27” iMac and every time I turn it on it flashes the screen and stays black.I can access it through a network using screen share and I can use its camera.I can see its desktop and use it normally but from another macbook. But the screen of this iMac doesn’t show anything.

What might be the problem? is There anything I can do it before take it to assistance?

thank you very much!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0

댓글 1개:

Hi!

Thank you guys for the answers.I don't know how to open up my iMac.I was expecting maybe it could be solved by some commands.I will try to do this test Dan before I take it to apple store.

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Check the LVDS connector from Screen to Logic board. Push it in if it's out. If not, then worth getting a new LVDS connector cable, try that out before thinking about replacing the screen.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

Take a flashlight pressed against the screen at a sharp angle are you able to see a faint image of your desktop and its icons? If you do then the issue is the backlight logic not the LVDS cable or the GPU board.

Being able to access your system remotely is a good sign as that tells us the main logic board is good

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Eduardo Tavares 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 8

전체 시간: 47