주요 콘텐츠로 건너뛰기

Possible to add a blade SSD to the original base model A2116?

In the A2116 teardown (the base model with no Fusion Drive), the connector for the Apple blade SSD is not loaded, and hence you cannot upgrade the miserably slow hard drive to a blade SSD.

Question : Could you upgrade this just by adding the SSD connector, or are there other components required to support the SSD that are also not loaded?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

선택된 해법

There are quite a few parts which you would need and the SSD connector is custom!

You could replace the logic board, depending on which model you got it might be a opportunity to also upgrade your CPU. Otherwise, best to sell yours and get another one with the blade SSD installed (not Fusion)

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Thanks Dan. I have the connector (taken from a donor 820-00165-A) so that is not a problem. Could you elaborate on what other parts are required please?

@ranaraych - I've never tried!

Best to refer to the schematics and boardview drawings and if you have a donor board compare across them.

의견 추가하세요

귀하의 답변을 추가하십시오

Rana Raychoudhury 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 29