installed new ifixit battery and showing no charge

Question

MacBook Pro 13" Retina Display Late 2013

모델 A1502 / 2.4, 2.6 또는 2.8 GHz 듀얼-코어 Intel 프로세서 / 2013년 10월 출시

552 질문 전체 보기

Ben Boeving @benboeving

평판: 1

1

게시일: 2021년 2월 15일

옵션

installed new ifixit battery and showing no charge

I installed a new iFixit battery on my MacBook and it is showing as no charge. MagSafe charge is showing orange, but if the unplugged computer shuts down. I have tried all the troubleshooting recommendations with no luck.

Thanks, Dan. Sorry for the confusion. I have a real Apple charger. It is the original that came with the Macbook when I purchased it. I guess my question is, this happened right after I installed the new battery. Is there something I could have done in the process to create the problem?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 6개

Let’s get a better view of things, install this gem of an app! CoconutBattery take a snapshot of the apps main window and post it here for us to see 기존 질문에 이미지 추가하기

Dan 의 2021년 2월 15일

Thank you. attached a picture!

Ben Boeving 의 2021년 2월 15일

Did you practice good ESD protection? Static electricity can damage MOSFET's. Winter time is always tricky! As the humidity within the air can be quite low which can make things worse!

Dan 의 2021년 2월 16일

Since I am not really aware of ESD protection, I am going to say probably not. I am guessing that is not a good thing?

Ben Boeving 의 2021년 2월 16일

True its not good ;-{

Again lets get the basics done first! Did you clean the MagSafe connector on your system make sure the grim is all cleaned out on the plastic and contacts.

Dan 의 2021년 2월 16일

댓글 1개 더보기

댓글 달기

답변 1개

Let’s get a better view of things, install this gem of an app! CoconutBattery take a snapshot of the apps main window and post it here for us to see 기존 질문에 이미지 추가하기 — Dan
Did you practice good ESD protection? Static electricity can damage MOSFET's. Winter time is always tricky! As the humidity within the air can be quite low which can make things worse! — Dan
Since I am not really aware of ESD protection, I am going to say probably not. I am guessing that is not a good thing? — Ben Boeving
True its not good ;-{

Again lets get the basics done first! Did you clean the MagSafe connector on your system make sure the grim is all cleaned out on the plastic and contacts. — Dan

Dan @danj 평판: 481k Self employed contract worker 35 330 971 · Answer 1 · 2021-02-15T15:32:43-07:00

가장 유용한 답변

Dan @danj

평판: 481k

Self employed contract worker

35

330

971

게시일: 2021년 2월 15일

옵션

CoconutBattery is showing a healthy battery. But the MagSafe adapter/charging logic within the logic board does appear not to be working properly.

Note the Full Charge Capacity is 72% Yet with the Power adapter Connected it is not charging your system! (Charging with 0 Watts).

So let’s start off making sure the MagSafe connector on your system is clean and the pins using a pink pencil eraser. As well as make sure you have a REAL Apple charger as many knockoff units can damage the charging logic!

Only get your charger directly from Apple Apple 60W MagSafe 2 Power Adapter (MacBook Pro with 13-inch Retina display) Sadly Amazon and eBay listings are 95% knockoffs! Even when they say OEM! Don’t buy them!! Buy only from Apple authorized dealer!

Here’s some useful write-ups on knockoff chargers!

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 2개:

Also, when the charger is disconnected the computer automatically shuts off. Thoughts? Thank you!

Ben Boeving 의 2021년 2월 15일

As I stated you have a MagSafe adapter/charging logic within the logic board does appear not to be working properly.

This will require someone with micro soldering skills and access to the needed MOSFET's. But thats after you've cleaned the MagSafe connector contacts and bought a REAL Apple charger.

Dan 의 2021년 2월 15일

댓글 달기

MacBook Pro 13" Retina Display Late 2013

installed new ifixit battery and showing no charge

Update (02/16/2021)

답변 1개

귀하의 답변을 추가하세요