주요 콘텐츠로 건너뛰기

모델 번호 A1238 / 80, 120, 또는160GB 하드 드라이브 / 검정색 또는 은색 금속 외형

904 질문 전체 보기

change the iPod Classic from hold ON to hold OFF

Hello, it's My first time with an iPod classic and i want to know if this is normal. when i turn on the hold switch, after a couple of seconds the light turns off, this far everythings ok, we can still see the name of the song, the artwork etc. Til appears the clock screen right?

When you turn off the hold switch in the iPod clock screen the backlight turns on automatically right?

But it doesnt turn on automatically when remains on the Music screen (with the backlight off, obviously), i have to touch the clickwheel to actívate backlight again. Is this a normal thing or it's something Bad with the screen??

I Hope You guys can help me

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

Also, please change the question as you aren't stupid. Probably something like "Does changing the iPod Classic from hold ON to hold OFF cause the backlight to come on?" This way anyone else who searches the web and comes here can gain the info as well.

댓글 달기

답변 1개

선택된 답변

@newipoddude,

Just checked on my iPod classic and same result. The screen not bad. The lock button “locks out” or disables the scroll wheel. Depending on your backlight settings, since the iPod gets no false clicks from the scroll wheel, the screen stays off.


Even if you slide the lock button into the unlock position, the screen will not turn on because there has been no input from the scroll wheel. The only way to bypass this behaviour is to turn the backlight on permanantly but that would just drain your battery.

Don’t forget to mark the question as solved if this answered your question.

All is good but if you want to change the system firmware, you can install Rockbox (YMMV not my cup of tea). Go to this Youtube video to get more info: https://youtu.be/xZTD-H2dTlg

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

bryan trinidad 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 12

전체 시간: 228