주요 콘텐츠로 건너뛰기

Repair guides and support for the 3rd generation of Chevy G-Series vans. Similar vans were produced under the GMC brand. Both used suspension and steering parts from GM's C-series pickup trucks.

15 질문 전체 보기

What can cause our ignition switch to not turn over with key in it

Hi fellas, we recently bought a 1988 Chevrolet G20 camper Van and we were having to wiggle the key to get the ignition to turn over but once we get it to turn it cranks just fine. Today, after trying for hours, we can’t get it to turn over, we tried turning the wheel, we tried getting a new key thinking the key was worn out but it still won’t turn over now. Any ideas on what it could be?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

You need a new lock cylinder. I don't know all the specifics about your vehicle (like engine size etc) but I did a search based off what info was provided. You're looking at $20 or less at an auto parts store. I've posted a pic so you can see what I'm talking about. The cylinder is worn down so the keys aren't aligning everything as they should. A new key won't help much because the wear is also on the pins themselves. Replace that and you should be right as rain.

Block Image

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Maura 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 5

전체 시간: 127