주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

Charging problem after replace rear panel and dock connector

Hi:

I just change the rear panel, and the dock conector

from my iPhone 3GS model A1241.

Everything is working fine,

- on/off/home button

- /volume button/mute button

But when it's connect the iphone to the computer (Imac) or

wall adapter, never fill out the battery. The itunes

don't recognize iphone, so i can't do back back up data.

Before the replacement, the battery was working good

What can be wrong ?

Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 3개

선택된 답변

First I would check to make sure the dock assembly is connected properly and is sitting right on the logic board. Also check if it is getting an antenna signal and home button working.

If those check out you may want to look for pins missing in the dock or other debris causing an obstruction.

The cord you are using could be defective (if using the same cord).

I don't think it would be the battery in this case because iTunes isn't recognizing either.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Hello thanks for your info.

Yes i already check all this things (Home button - dock connector+logic board), and i have three cords and don't work with no one

Today i see more strange behavior with the battery,

the iphone bar shows like 40 % or 50% off the charge

so ... i put all day the iphone in ipod mode (playing forever)

and the iphone stay on play like 4 hours.

So i think the battery is working good but the iphone for some reason

don't reflect the really state off the batery

i don't know what part can have issues

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

I used to have the same problem I did was restore the iphone (3g) but now I can not finish the restoration because my Macbook does not recognize

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Lejo 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 974