주요 콘텐츠로 건너뛰기

모델 A1312 / Mid 2010 / 3.2 GHz Core i3 또는 2.8 & 3.6 GHz Core i5 또는 2.93 GHz Core i7, ID iMac11,3

383 질문 전체 보기

I replaced hard drive with SSD in 2019 without Thermal Sensor Adapter.

I replaced hard drive with SSD in 2019 without having the Thermal Sensor Adapter. I have it now and want to know if the installation process changes for me installing it into my imac 27 2010. Do I need to reset any of the SMC or prams? Any other input welcomed.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 1개:

Please rephrase your question. It sounds like you installed the new SSD into another machine and are now moving it. Did you get a runaway fan when you installed without the thermal sensor?

댓글 달기

답변 1개

The 2014 models onward don’t need the in-line sensor when running High Sierra or newer which is why your newer 2019 didn't need it, but your older 2010 will.

But! You might hit a SATA speed issue as the older iMac is only SATA II (3.0 Gb/s) so the drive needs support this slower I/O. Most drives today are fixed SATA III (6.0 Gb/s) which is to fast. Some drives are auto sense, and will match to the systems SATA ports I/O speed. Review the drives spec sheet to see what it is able run at.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Dxx 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 40