주요 콘텐츠로 건너뛰기

모델 A1278, 2012년 6월 출시. Turbo Boost가있는 Intel 프로세서, 최대 512 MB DDR5 비디오 RAM

1633 질문 전체 보기

Problems after replacing hard drive

Hi all,

I recently replaced the hard drive in my MacBook with this: 1 TB SSD

It worked well for the first couple days (maybe weeks? Time is blurring together these days), but now I’m running into a variety of issues. It’s been freezing fairly often - sometimes with black bars, sometimes with colorful dots in some areas of the screen, sometimes with just the screen I was on. Other times, it will crash and reboot. Sometimes it will crash and start making 3 beeps.

I’ve tried reseating/resetting all that I can and I’m at a loss. The problems don’t seem to line up with each other (from my research anyway) and I can’t figure out what do with this new hard drive. I could try switching to the old drive, but I’ve saving that as a last resort.

Have any of you encountered this situation? Any advice would be helpful. Thanks in advance!

1 TB SSD 이미지

상품

1 TB SSD

$149.99

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

가장 유용한 답변

1. What drive Did you put in?

2, Is it backward compatible to SATA II 3.0 Ghz?

  1. Did you replace the hard drive/IR cable
  2. MacBook Pro 13" Unibody Mid 2012 Hard Drive Cable Replacement
  3. MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable
MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable 이미지

상품

MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable

$34.99

해당 답변은 도움이 되었습니까?

점수 3

댓글:

1 TB SSD

This is the drive I used. I didn't replace the cable, but will do so next. Thank you!

That drive is comparable and should work.

@nfezz - Every time its the cable! Fixes them 99% of the time. It should honestly be considered a preventative repair on these 2012 machines.

Hi all. I replaced the hard drive cable and I’m still running into the same issues. Any other ideas before I try switching back to the old hard drive?

의견 추가하세요

귀하의 답변을 추가하십시오

nick felezzola 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 40