주요 콘텐츠로 건너뛰기

2010년 4월 출시 / 2.4, 2.53 GHz Core i5 또는 2.66, 2.8 GHz Core i7 프로세서

590 질문 전체 보기

I think my 2010 15" MBP logic board is fried

I pulled my laptop out of my backpack a few weeks back and it would not power up. It’s a mid 2010 15” Unibody i7 2.66 GHz with 8GB RAM and two SSDs (1.5TB total).

When I press the power button:

  • I don’t hear fan spin up
  • The screen backlight does not turn on.
  • There is no boot chime
  • The status indicator light on the front of the top cover does, in fact, turn on.
  • Magsafe turns green and then amber when battery is connected. When the battery is disconnected it is only green.

With the case open, I have been able to get the fans to spin by disconnecting the battery and first pressing the power button, then plugging the magsafe in. I don’t think I’ve been able to reset the PRAM and SMC successfully as it doesn’t seem to get past post. Also, I hooked the laptop.

I’m not a logic board repair person by any means, but I’m thinking maybe the thermal paste on the GPU and CPU needed replacement and those components may have overheated. I noticed the laptop got pretty warm before this failure happened.

Any and all help is appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

After looking up some more solutions on the web I ended up baking the logic board in the oven and that fixed it. I think it was the GPU and it needed a reflow. It was down for weeks and I’m typing this message on it now. Thank you very much for the help.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

Go for a spontaneous restart. Disconnect the mag-safe then the battery from the logic board. Press and hold the power button for 10 seconds. Reconnect the battery then the mag-Safe. It should restart on its own.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

Thank you for the help.

댓글 달기

귀하의 답변을 추가하세요

JDiddy 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 5

전체 시간: 57