DS Lite P6 Connector Black Clamp Popped

Question

Nintendo DS Lite

This Nintendo DS Lite was released in 2006 as the successor to the Nintendo DS. Getting inside this device is simple, making for easy fixes.

316 질문 전체 보기

Robert Isidro @rlsid

평판: 13

2

게시일: 2021년 8월 1일

옵션

DS Lite P6 Connector Black Clamp Popped

I was in the middle of reassembly of my DS Lite. I tried to detach the touch screen ribbon cable that connects to the P6 plug but the way I hold my DS while detaching, the black clamp that holds the ribbon cable securely just popped off. Good thing that I still saw the black clamp as it is too darn small. Is there are any way to snap it back in to the connector? If not, are electrical tapes helpful for holding the cable securely?

The picture below is not the actual. Just a reference. Thanks in advance!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 1개

Kyle @kystyle 평판: 1 1 · Answer 1 · 2021-08-06T19:00:32-07:00

Kyle @kystyle

평판: 1

1

게시일: 2021년 8월 6일

옵션

I had this exact same problem, so I tried holding it down with a bit of Blu Tack, but that didn’t work very well.
I recently came across this video https://www.youtube.com/watch?v=dRxePF-d... which demonstrates the replacement process of the P6 connector. You need a soldering iron to do it, though, so I will be giving this a go once I get my hands on one.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 1개:

Yeah I already saw that video and I don't have the skills to replace the connector. I managed it get it working by putting an electric tape to hold it in. The most difficult part was putting the motherboard back in the case while holding the tape in securely. And the touch screen fortunately still works! :)

Robert Isidro 의 2021년 8월 9일

댓글 달기

Nintendo DS Lite

DS Lite P6 Connector Black Clamp Popped

답변 1개

귀하의 답변을 추가하세요