주요 콘텐츠로 건너뛰기

Model A1224 / Mid 2007 및 Early 2008 / 2, 2.4, 또는 2.66 GHz Core 2 Duo 프로세서

New superdrive install causing problems

I recently installed a new superdrive in my iMac and now discs will not mount. When I insert a CD or DVD the drive powers up and the discs show up in disc utility, but they never actually initialize. I am currently updated on all my software (10.5.8 and all software up to date), and the drive seems to be working mechanically, so I am stumped. HELP!

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

점수 3
댓글 달기

답변 3개

가장 유용한 답변

Thats a strange issue, if you can read them on the disk utility. Try booting from the mac os installation disk, by booting and holding "C" if it will boot off of the disk, then there is a problem with the operating system. if it won't boot off of the disk, then there may be a problem with the optical disc drive, open disk utility and select "Verify Disk" under the optical drive, if there is an error, then the drive is almost certianly bad.

이 답변이 도움이 되었나요?

점수 2
댓글 달기

I just replaced my u-85j-c with your recommended u-875S, when inserting cd it wont grab it unless i push it in and then it wont mount and after that as it tries to eject, it just goes thru the cycle without ejecting unless i put a credit card in and help it eject. Any ideas?

이 답변이 도움이 되었나요?

점수 0

댓글 1개:

My first idea is: start a new question, it makes it easier to handle - everything else would led to misunderstandings

댓글 달기

ooh it an iMac Intel 20" EMC 2133

이 답변이 도움이 되었나요?

점수 0
댓글 달기

답변을 추가하세요

Michael Degnan 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 6

전체 시간: 5,805