기기를 수리하세요 커뮤니티 상점

현재 iPod Touch 라인은 6세대까지 출시되었습니다.

2618 질문 전체 보기

옵션

Problem with docking connector

Hi:

I have both a Gen 1 and Gen 2 iTouch. I am experiencing the same problem with both devices. When using the type of cable / connector that utilizes a snap lock/push buttons to release - no problems! When using the other type of devices that have a slide in only type of connection, I develop problems with the connection jack. I have to wiggle the cable or iTouch until the correct alignment is achieve, and the communications / charging work. If I don't keep them in the same alignment I lose connection.

This is of course quite prblematic, since most of the newer attachments using the dock connector are of the slide on type.

Are there any solutions for this?

Does anyone else experience the same problems?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 4개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

you could try to clean the dock connector, take something like a toothbrush and clean the dock connector, then blow the dust out, that may solve the problem, if not, then you may be stuck with the issue, there are many ways to clean the dock connector, but don't give up, cleaning them requires a steady hand, and patience.

해당 답변은 도움이 되었습니까?

예 아니요
점수 3
댓글 달기

옵션

I have the same problem with 1st gen touch, I have to wiggle the cable to achieve a sync. Using a cable with a snap lock/push buttons sometimes works, but more often than not I have to still wiggle the cable. I think I broke the docking connector one day when I accidentally connected the cable the wrong way upside down in the dark.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

the charging connector hp slate 7 is compatible with the HP 1302 plus 7 ?

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

Is there anyplace that is qualified to fix this

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

khkclk 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 6,713