기기를 수리하세요 커뮤니티 상점

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2694 질문 전체 보기

옵션

iPhone 6s is stuck in boot loop after battery replacement.

My iphone 6s had a bad battery when I bought it from one of my friends. I was aware of it too but was just looking for a backup phone. One day my 6s just stopped charging and eventually died. Tried multiple cables to see if maybe it was just a bad cable even tho they all worked with my Xr. Eventually I just bought a battery and replaced it. It started up and worked but wouldnt charge again. So I got the charger port replaced. After I was finished It started charging but got stuck in a boot loop. The battery holds a charge even when unplugged the phone still does it till I force the buttons down to force shut down and then it turn on and do the same thing till u force it off fast enough it stays off. Couldn’t figure out really what to do abt it at this point.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

All you had to do is press and hold the power button for 5 minutes and it would've reset the battery state and come back to life. It's a typical behaviour of any iPhone once the battery has been replaced... I know it's too late for you now but let's leave this info here for others to benefit.

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

If you are sure the battery is not faulty and the connector is seated properly you will need to try an update as the 6s sometimes needs one after a faulty battery.

·         Have iTunes open on pc or mac with lightning cable connected just to PC.

·         With the phone turned off, Hold the home button in and connect the cable.

·         Wait for recovery mode to show up.

·         Update the phone.

If this doesn’t work it will more than likely be a parts problem either battery or charge port.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

All you had to do is press and hold the power button for 2 minutes and it would've reset the battery state and come back to life. It's a typical behaviour of any iPhone once the battery has been replaced... I know it's too late for you now but let's leave this info here for others to benefit.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

do i hold the power button for two minutes when it is on or do i shut down first then hold the power button for two minutes after it is off?

의

댓글 달기

귀하의 답변을 추가하세요

eli 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 3

7일 전: 26

30일 전: 127

전체 시간: 2,093