기기를 수리하세요 커뮤니티 상점

모델 A1312 / Mid 2010 / 3.2 GHz Core i3 또는 2.8 & 3.6 GHz Core i5 또는 2.93 GHz Core i7, ID iMac11,3

383 질문 전체 보기

옵션

Diagnostic LED 1 blinks once

so i’ve recently been given a Mid 2010 27” iMac that wasn’t powering on. Initially i thought i must most probably be the Power supply that had croaked it and needed to be replaced because when i plug in the power the diagnostic LED 1 flashes once then once again but not as bright that second time, as if it was loosing power. No other LEDs are lit.

I have replaced the PSU with a known working unit but still getting the same thing.

im hoping its not the logic board that has an issue or a short on it,

is there any chance it would be the jack/EMI unit where the power goes into the imac?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

You have a short within the logic board and/or the MXM video board.

My money is on the video board! Do you have the correct one to test things?

Otherwise its following the power rails with a DVM and a set of schematics and boardview drawings.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 2개:

Thanks! But darn was really hoping for the video board being the issue. Removed it but am still getting the same problem.

Must be a short on the logic board then.

의

@ahkoo - Follow the yellow brick road ;-}

Get a DVM and a set of schematics and boardview drawings following the power rails and check the caps.

You might want to find someone with the deeper skills to help you.

의

댓글 달기

귀하의 답변을 추가하세요

Ahkoo 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 18

전체 시간: 187