So my back camera started stuttering a while back and I found that magnets can get it to work, so I bought some small 3mm neodymium magnets and put them inside the phone next to the camera and now both the front and back camera are not working. any ideas?
좋은 질문 입니까?
평판: 33.2k
26
36
32
You put it on the device internals? Where exactly? Neodymium is still an electrical conductor And putting any sort of electrically conductive material near a circuit board has the potential to do damage. Have you tried taking the magnets back out to see if there is any difference?
해당 답변은 도움이 되었습니까?
I put it in the bottom left hand corner of the camera on its side, it was in between some of the flex cables for the screen. I have tried to take them back out and I have tried a new camera as well, both to no avail.
@ZenLo I can't think of anything that would effect both cameras since the don't really share any specific power or data lines, on the board. But if neither of them are working at all and putting in a new rear camera doesn't work I would still think this is related to the board.
I'm not sure how if the magnets stayed where you put them. (I assume they stuck magnetically and I know those magnets are rather strong) Maybe add some pictures of the camera area of the board to your post.
24 시간 전: 0
7일 전: 8
30일 전: 22
전체 시간: 374
