Hello!
My Question has 3 parts.
a) MUST the iMac Mid-2007 20" EMC 2133 use PC2-5300 or will it run the PC2-6400?
b) I believe it will run up to 6GB of RAM, although not officially supported by Apple?
c) Must both slots carry equal amounts of RAM, eg. 2x2GB, 2x3GB, or can I configure unevenly, eg. 1x4GB + 1x2GB, 1x2GB + 1x1GB, etc.
Thanks!
Taylor
좋은 질문 입니까?
평판: 685.3k
3.4k
1.1k
2.6k
Standard RAM: 1 GB
Maximum RAM: 6 GB*
Details: 1 GB of RAM is installed as a single module.
*Apple officially supports 4 GB of RAM, but third-parties have been able to upgrade the system to 6 GB of RAM using one 2 GB and one 4 GB memory module.
The "original/Mid-2007" Aluminum models -- the iMac "Core 2 Duo" 2.0 20-Inch (Al), "Core 2 Duo" 2.4 20-Inch (Al), "Core 2 Duo" 2.4 24-Inch (Al), and "Core 2 Extreme" 2.8 24-Inch (Al) -- use 667 MHz PC2-5300 DDR2 SO-DIMMs, which Apple further specifies must meet all of the following criteria:
PC2-5300
Unbuffered
Nonparity
200-pin
667 MHz DDR2 SDRAM
The "Early 2008" Aluminum models -- the iMac "Core 2 Duo" 2.4 20-Inch (08), 2.66 20-Inch (08), 2.8 24-Inch (08), and 3.06 24-Inch (08) -- use 800 MHz PC2-6400 DDR2 SO-DIMMs, or specifically:
PC2-6400
Unbuffered
Nonparity
200-pin
800 MHz DDR2 SDRAM
해당 답변은 도움이 되었습니까?
@ Mayer: Thanks for your infos,
but imho this is correct, but not the answer to the first question.
The 1st question is: will the iMac7,1 –NOT the iMac8,1– also accept 800MHz DIMMs. like some other 667MHz Mac models do ?
The answers to questions 2, and 3 are correct.
@klausfinke The EMC2133 only has two models, both 7,1. Your information is incorrect
24 시간 전: 0
7일 전: 0
30일 전: 3
전체 시간: 1,450
