Skip to main content

Airport not being detected

I've tried multiple working airport extreme cards. None are detected. Ran hardware tests card is never detected. Verified that all cables are fine and connected. This is one of the boards that has the ram slot issue. Currently running 10.5.8. It's not detected in 10.4 either.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

1개의 답변

선택된 해법

It sounds like a logic board problem. Can you find one of the USB wifi units to try? If that corrects the problem you can swap out the card cage which may correct your problem. Ralph

해당 답변은 도움이 되었습니까?

점수 3

댓글:

I tried a PCMCIA card, but not a usb. I'll pick up one and try that. I also posted a question about screen flickering, but I believe both of these were in the hope it was not a logic board issue.

의 답변

If you tried a PCMCIA card and you have the flickering problem I would suspect a logic board problem. Ralph

의 답변

I was hoping that wasn't it. But Logic Board replacement will be my next step. Thanks Ralph.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

stacywebb 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 1,955