기기를 수리하세요 커뮤니티 상점

Repair guides and support for LED, LCD, HD and other Vizio TVs.

932 질문 전체 보기

옵션

*M220VA* fully disabling the HDMI sleep timer?!

I use my "TV" as a monitor, and there's a sleep feature on the set that causes it to turn off after so long I do not use it as a TV (I did when we had cable, but since then that's been eliminated entirely). I checked under Timer and even selected "Off" on the timer but the TV still shuts down "to save energy". I still see "No signal. The power will be turned off."

This TV is a power sipper, so I don't need (or care!) about the "feature" -- in fact, I hate it because when the computer it's hooked up to sleeps it shuts down and I need to wake up the TV after turning the computer on.

Is there any way to disable this nonsense? Ideally it should behave with a partial "sleep" mode, but I know with a TV it's on or off. Vizio says no (of course, but who knows with them) but there has to be a way...

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Hello this is Maxed Out IT

Fallow this

To setup a sleep timer: Menu > System > Timers > Sleep Timer Use the Left/Right Navigation buttons on the remote to highlight the period of time after which you want the TV to go to sleep: 30, 60, 90, 120, or 180 minutes. If you don’t want the sleep timer to activate, change the setting to Off.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 5개:

Tried that. It didn't help.

의

ok now the next sleep timer

의

To help save energy, your TV is set by default to turn off after 10 minutes without a

video or audio signal. This feature can be deactivated.

To set the Auto Power Off feature:

Menu > System > Timers > Auto Power Off > Of

의

Did it work?

의

@maxedoutit The M220VA is too old for that.

의

댓글 달기

귀하의 답변을 추가하세요

Nick 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 3

7일 전: 26

30일 전: 52

전체 시간: 804