주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

I have been dealing with my phone overheating

I have just took my phone apart and turned it on and felt where the one spot of incredible heating is taking place, It's in the mess of display cables. I was curious about what this means for replacement parts, What part should I replace? My display, battery, Cables?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

When the iPhone 6s or 6s plus starts overheating and the heat is coming from the top of the board it usually means the Wi-Fi chip is has a short inside it. The Wi-Fi might still work for now but it will not be long before the phone will be inoperative due to overheating. The Wi-Fi chip is located on the underside of the board under the display connectors.

I would suggest an upgrade as the repair would be more expensive than the phone is worth as replacing the chip is not straight forward and you also need to unbind the Mac Address from the NAND for the new chip to work.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

%#*@, the whole reason I was looking for a repair was because I ain't got any money. Well thank you !

댓글 달기

귀하의 답변을 추가하세요

Lfjnjd0liffhahf 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 16

전체 시간: 69