주요 콘텐츠로 건너뛰기

Released in 2019, these wireless headphones have digital noise cancelling technology and came in a variety of colours. These can be identified with the model number WH-H910N.

2 질문 전체 보기

Noise Cancelling malfunctioning after disassembly

Ever since I took apart my headphones (as part of the repair guides I made for these headphones on iFixit), the right earpiece's Noise Cancelling has malfunctioned.

It makes crackly sounds and a weird fluctuating pressure that kind of feels itchy, and when it gets pressurised enough in the cup, it makes a really loud, almost pulsating whistling sound. I have to use these headphones without the noise cancelling at the moment to prevent this from happening, which is a big shame.

I've reset the headphones to factory settings, which didn't fix the issue either.

I've inspected the solder joints between the NC mics and the PCBs and they seem fine (but I really don't know much about soldering and I don't have a soldering iron). I'm not that experienced in this sort of technology so I don't know what the underlying issues could be, or what I could even be looking for, really. :S

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Did you ever find the solution? This exact issue has been happening to mine, and I originally thought it was because the mic cables were shorting out with each other, so I've opened them (three separate times) and put electrical tape on the cables to ensure they don't touch each other, but that only worked for a day. These are refurbished pairs, but I don't see any sign of damage or anything wrong with the headphones themselves

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Unfortunately not, I ended up just buying a used pair of XM3s instead x.x

댓글 달기

귀하의 답변을 추가하세요

Caius Nocturne 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 4

전체 시간: 89