기기를 수리하세요 커뮤니티 상점

Guides and repair information for coffee and espresso makers from Jura Elektroapparate AG, a Swiss developer and distributor of home appliances.

101 질문 전체 보기

옵션

Impressa s9 empty grounds takes a full 10 min before it clears

Jura impressa S9 empty grounds won’t clear until you wait 10 minutes before re inserting the drip tray. I’ve tried every fix possible having to do with cleaning in the back of the tray and grounds in chamber. It is weird because if I’m descaling and it tells me to empty tray, it lets me insert it immediately. When it tells me to empty grounds, it does it 100% of the time. Are there Micro switches on an Impreza S9? If so where are they?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

The responsible parts can be seen in page 8 of the pdf, #510. There are no microswitches, just three contact plates on the drawer and their interior counterparts. It is very important that all the gaps between them are clean and dry, otherwise the device "feels" moisture and "thinks" that the water level in the drawer ist too high . If you want to look for the interior contacts, use this guide: Jura Impressa S Modelle Pumpenträger ausbauen

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

옵션

This page has videos for disassembly and refurbishing your device and an exploded parts diagram for the Jura S9 is this pdf file. Hopefully this will enable you to identify and rectify any problem.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 2개:

Madura is leaking under the back of the machine. Everything else works great. I have an Empressa S9 that was purchased new in O2. I realize it’s old but it has been taken care of but I’d like to see if I can get in the back and fix the leak, but I need the key to open it in the back Help help

의

You need an "oval drive bit" e.g. from iFixit. Or make your own.

의

댓글 달기

귀하의 답변을 추가하세요

lisa anderson 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 24

전체 시간: 497