The expansion port on the back of the n64 controller

Question

Nintendo 64 Controller

Repair information for the Nintendo 64 Controller, model number NUS-005. This controller was released in 1996, for use with the Nintendo 64 Game Console.

9 질문 전체 보기

Kaleb Wheat @rebelgingy

평판: 1

게시일: 2022년 6월 28일

옵션

The expansion port on the back of the n64 controller

I have been trying to play Pokémon stadium for the n64 but all four of my controllers don’t read that there is a transfer pak and game boy game in the controller, two of the controllers are third party so that’s why they aren’t working with the transfer pak but I was wondering how to repair the oem expansion ports, I have tried three different transfer paks and multiple controllers to no avail, the Pokémon game I have been trying is authentic too, thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 5개:

so i find it hard to believe that ALL 4 of them are bad. there might be something up with the console?

Logixal 의 2022년 6월 28일

@logixal yeah, I kept on trying them and I finally got one to work so I guess I was just unlucky with my controller buys

Kaleb Wheat 의 2022년 6월 28일

Wow interesting. Maybe try cleaning the cartridges?

Logixal 의 2022년 6월 28일

I'm having the same problem and noticed that one of the pins is broken on the controller expansion port. Trying to find a replacement piece to solder in, I don't want to buy a new controller. Unless anyone has a suggestion on how to solder it without replacing the whole thing. I'm not sure I know how to solder a new pin in there, it's that's even possible, those pins are small.

STARPATR0N 의 2023년 7월 7일

I found this. Anyone think it will do the trick? https://www.digikey.com/en/products/deta...

STARPATR0N 의 2023년 7월 7일

댓글 달기

답변 1개

so i find it hard to believe that ALL 4 of them are bad. there might be something up with the console? — Logixal
@logixal yeah, I kept on trying them and I finally got one to work so I guess I was just unlucky with my controller buys — Kaleb Wheat
I'm having the same problem and noticed that one of the pins is broken on the controller expansion port. Trying to find a replacement piece to solder in, I don't want to buy a new controller. Unless anyone has a suggestion on how to solder it without replacing the whole thing. I'm not sure I know how to solder a new pin in there, it's that's even possible, those pins are small. — STARPATR0N
I found this. Anyone think it will do the trick? https://www.digikey.com/en/products/deta... — STARPATR0N