기기를 수리하세요 커뮤니티 상점

Repair guides and troubleshooting information for the Game & Watch, a series of 60 handheld video games produced by Nintendo from 1980 to 1991.

12 질문 전체 보기

옵션

What screwdriver should be used to unscrew Game and Watch screws?

I was wondering what screwdriver is required to undo the Game and Watch screws. This question is not for the new Game and watches with the tri-wing screws. This is for the ones from the 80's era.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 1개

(Sorry for thread revival).

It's some kind of proprietary variation of a flat head screw with a registration pin in the centre. A standard 3mm flat head will work, but it'll just be a little more precarious than normal because of the gap in the middle. I've only been searching for a day, but I don't know if these are available today. If anything, they might be found in Akihabara in Tokyo or Den-den town in Osaka,

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

could you give more info, is it a certain shape etc. like philips could be ph00 gameboy could be gamebit

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 3개:

It looks to be a flathead but idk what size.

i looked at an image and it looks to say 4.3 mm

의

@tay0_0 an ifixit kit will have most of the bits you need but there are various screwdriver sets on the market, depends on your budget etc

의

Thank you so much!

의

댓글 달기

귀하의 답변을 추가하세요

tayola 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 10

전체 시간: 419