주요 콘텐츠로 건너뛰기

The PlayStation 3 (or commonly known as the PS3) is the third home computer entertainment system produced by Sony Computer Entertainment, and the successor to the PlayStation 2. It was released November 11, 2006

727 질문 전체 보기

ps3 still in ylod

hi i have a ps3 with ylod and i boght the reflow package from here so i follow the guide but the ps3 still giveme the yellow light i try to reflow for 25 secs like the guide says and then for a 1 min and nothing happen so i open it again and i try to reflow for like a 2 mins and still in the yellow light anyone can help thanks

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

do you have a crappy/dead motherboard to make a few test? if so, use that to determine the time/heat/ distance you would need to melt the solder. usse the dead board, point the heat gun on some smaller parts, watch the solder - when it looks more "shiny" - it should be molten (don't forget to keep an eye on the time it took to melt!) - then go to the next part - a bga ic - there should be a few on a common motherboad - make the same thing - but you won't see anything whats under the ic - but you should keep an eye on the surrounding parts (shiny!) - in case of a dead board - you could also try to "move" the ic a little bit (way less than a mm!!) - if the solder is molten - it should move slightly (don't try that on a board that should be repaired - it would most likely kill it) - same thing as before - keep an eye on the time! - now you sould be able to determine the heat an the time it would take to reflow the chip on the ps3.

i always use soldering flux for those kind of repair!

good luck

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

gmaincomputerservice 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 488