기기를 수리하세요 커뮤니티 상점

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

옵션

iPhone 6 Dying at 4% after battery replacement!

I have an iPhone 6 and it randomly started to bootloop.I knew it was a battery issue, So I went into battery health and it was just loading.So I went to the same place I got my phone battery replace and they replaced it again.Everything was going great until my iPhone was at 4% and it randomly died.I plugged it in but instead of showing the low battery logo it showed the apple logo and it was at 4% instead of 1%.What should I do?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

Have You calibrated the battery?

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Try calibrating the battery

Run it down until it shuts off,
Then charge it up to 100% uninterrupted then keep it plugged in for 2 more hours,
Run it down till it shuts down,
And finally, charge it uninterrupted to 100%

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 7개:

I was going to mention calibrating the battery as above but I’d run it down to 10% and then charge again rather than letting it die. But do what @beanman56 says.

의

@strongbow - It’s very necessary for the calibration to be done completely as it’s said,

Otherwise it’s probably gonna be the same

의

To be honest, they don't need calibrated at all. Calibration was for the old nickel based batteries. The newer lithium based batteries don't need calibrated. They are basically plug and play. I wouldn't worry about dying at 4%, it should work itself out over a few charges.

의

@strongbow - Then explain why ifixit says to calibrate the battery

의

Ask them? I’m not trying to explain someone else’s mistakes.

https://discussions.apple.com/thread/789...

의

댓글 2개 더보기

댓글 달기

귀하의 답변을 추가하세요

Keshawn Vasugan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 80