기기를 수리하세요 커뮤니티 상점

2020년 9월 18일에 출시된 8세대 iPad, 32 또는 128GB 모델로 제공됩니다. 모델 번호 A2270.

17 질문 전체 보기

옵션

Pinout of Home Button Connector? iPad 8 Wifi, torn pads

I have a iPad 8 and some monster pulled a few pads off trying to replace home button zif connector. I started scraping to see if I can follow the traces. They are not clearly seen through the mask like I see some show.

Didn't want to start tearing all the mask off, and figure someone has seen this. Do we know where these traces go to ? Does it even use all the traces? iPad 8 seems to be the only ipad I don't have info on. Here is a pic of what I have under the microscope.

Block Image

Thanks in advance !

Update (08/20/2022)

Oh my bad, it's a A2270

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 3
댓글 1개

Oddly enough, the pads that lifted are not used. The half pads I was able to use and still connected. I believe I'm good, i'll assembly and test. Purchased ZXW to confirm pin location to componets.

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hi

If you get a multi metre and put it in continuity try this

Put one probe on ground and the other on the bit that you scraped the mask off and see if there is continuity to ground

The reason why I am ask for you to do this is because it looks like a ground pad because of its size,obviously it’s quite hard to say but I don’t see traces going under a connector very often

I would have a look for a schematic and Board view so you can see where the actually go

Hopefully this helps

Any questions please ask

Thanks:-)

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 2개:

Hi does anyone have the schematic for the iPad 8 for the above area as I lost what looks like a micro resistor

의

The area is near the FPC connector on iPad 8 WiFi A2270 I lost a resistor but cannot see the value as they don’t seem to be written on

의

댓글 달기

귀하의 답변을 추가하세요

Eric 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 9

전체 시간: 435