logic board?... or something less expensive

Question

PowerBook G4 Titanium Onyx

모델 M8407 / 550 또는 667 MHz G4 프로세서

20 질문 전체 보기 | 3 부품 둘러보기

Onyx @onyx45567

평판: 9

1

게시됨: 2010년 2월 1일

옵션

logic board?... or something less expensive

My power cord to this PowerBook stopped charging my computer eons ago.... after research.i thought it might be the logic board that gave out but i just saw a link over to the right of here about a possible DC board that might be out? (for this model?)

anyways i want to get an enclosure for the hard drive to salvage what files are on there and just do away with the rest of the laptop.

what KIND OF ENCLOSURE would support a 44 pin ATA-5 drive? its from toshiba from my PowerBook G5 onyx ...

any feedback is greatly appreciated !

Thank You

'Berto

Any suggestions?

답변되었습니다! 답변 보기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요

점수 -1

댓글 달기

답변 2개

선택된 해법

mayer @mayer

평판: 689.5k

3.8k

1.1k

2.6k

게시됨: 2010년 2월 1일

옵션

Go to www.ebay.com. Do a search for external hard drive enclosure & ide & 2.5

You'll find a couple of hundred

이 답변이 도움이 되었나요?

예 아니요

점수 1

댓글 3개:

Do not get one for SATA

mayer 의 2010년 2월 1일

Take a look at the old AC power input, the tips on these break a lot and sometimes lodge in the DC IN port. Let me know if this is the case and we'll work on that repair.

mayer 의 2010년 2월 1일

I think i see the different ones SATA ATA and IDE...

i bought a SATA one and found out that doesn't fit my 44-pin HD...

(I take it SATA is too advanced for my poor onyx toshiba 30 GB)

so i guess we go for ATA or IDE?

what do you think?

thank you guys very much for the quick answers...

its frustrating when you're so close to fixing a problem...and then its after hours and comp usas and other computer stores are CLOSED!@

Onyx 의 2010년 2월 1일

댓글 달기

Take a look at the old AC power input, the tips on these break a lot and sometimes lodge in the DC IN port. Let me know if this is the case and we'll work on that repair. — mayer
I think i see the different ones SATA ATA and IDE...

i bought a SATA one and found out that doesn't fit my 44-pin HD...

(I take it SATA is too advanced for my poor onyx toshiba 30 GB)

so i guess we go for ATA or IDE?

what do you think?

thank you guys very much for the quick answers...

its frustrating when you're so close to fixing a problem...and then its after hours and comp usas and other computer stores are CLOSED!@ — Onyx