주요 콘텐츠로 건너뛰기

Apple Watch Ultra의 49mm 케이스는 거대해진 Apple Watch처럼 보입니다. 9월 7일에 발표, 9월 23일에 출시되었으며, Apple Watch 최초 MIL-STD 810H 및 EN13319 인증을 받았습니다. 맞춤형 액션 버튼과 L1 및 L5 GPS가 특징입니다.

7 질문 전체 보기

The hole above the crown

All the holes on the Apple Watch ultra are seated with a mesh spanned across the holes and looks to be seated with a tight span.

The mesh in the hole above the crown looks wrinkled. Can someone confirm this is normal and not a defect? Or is this some sort of a bellow?

Block Image

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

Could be the valve toa evacuate water after you've been swimming. Should be a setting on the watch for it.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Looks like that hole is leading to a barometric sensor. It also has a route to the band slot.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Does it look like a wrinkled piece of foil?

@Ferdi Mendes

the drilling might make it look like it’s wrinkled, but there is nothing "wrinkly" on/in that hole. The barometric sensor itself looks like a very tiny speaker cap.

댓글 달기

귀하의 답변을 추가하세요

Ferdi Mendes 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 15

전체 시간: 696