주요 콘텐츠로 건너뛰기

2020년 10월에 출시된 새로운 iPad Air. A14 Bionic 프로세서, 10.9인치 화면, 새로운 디자인, 전원 버튼에 내장된 Touch ID 센서를 탑재했습니다.

36 질문 전체 보기

iPad screen wont turn on after power button replacement

Hello, i got this iPad from a friend. The iPad fell down and the power button got smashed in . It did power on when I put a cable in it but it went straight to recovery mode, I tried exiting recovery mode but it wasnt possible. After opening the iPad up I replaced thee power button but now the display will only light up for a few seconds and turn off again. I tried connecting it to my computer but the device is not recognized by iTunes neither 3uTools

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

hello there,

It seems that the fault is deeper than originally thought (which is rather normal for iPads, they are difficult devices to repair, especially in untrained hands). Remove the home button (disconnect it) and try to start the tablet again. The recovery mode clearly indicates that at least one of the devices on the motherboard has no contact or shorts its circuits to ground. The motherboard needs to be removed and inspected for all circumstances. However, the repair should not be expensive and rather short. Due to the broken Home button, you will probably lose Touch.ID functionality.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Apostolos Gkioni 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 3

30일 전: 12

전체 시간: 87