주요 콘텐츠로 건너뛰기

모델 A1312 / Mid 2011 / 2.7 & 3.1 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac12,2

710 질문 전체 보기

Display is white and the machine reboots continously

Hello everybody.

My machine, an iMac (27-inch, Mid 2011) gave me a black screen yesterday, out of the blue, and after I rebooted it it starts the boot process with the Apple horizontal bar but at the mid point it goes blank as in the two pictures below.

Anybody has any ideas before I bring to service next week, please?

Block Image



Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Your system is getting stuck within POST. Let’s see if we can get past it, with a USB keyboard, restart and press the T key to enter into Target Disk Mode. You should see the FireWire and Thunderbolt icons on the screen are you able to get to that?

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thank you kindly @DanJ.

I took the unit to service as I only checked the SSD and the RAM. I suppose it's the NVidia graphics card but I will let the technicians to do a diagnostic and try to repair the damage if possible.

I will start looking for a Logic Board to replace the old one. I already did it with my old MacBook Pro 17" Late 2011.

Thank you kindly.

댓글 달기

귀하의 답변을 추가하세요

IONEL GRECESCU 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 4

전체 시간: 20