옵션

Smd parts on the main board p30 pro

Hello. I am wondering if you know what size a smd resistor is on the board please. I have full schematic. It is part reference r1278 100 ohms resistor. I believe it to be one of the smallest parts available but I don't have such a measure device on my microscope. It is a resistor right near the screen connection. Photos are attached. You can see missing resistor.

I'm unsure why it appears to have a fry mark where it obviously burnt out, i will fit a 100 ohms resistor and then test that pin to earth.

Also can you help advise how to remove the shields on this board, particularly the one on the rear side of where the battery connection is. Is it just a pry off or is there any solder to melt?

Any help or advice would be much appreciated

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2022년 11월 27일

옵션

I believe that these resistors are 0.12 by 0.06 inch size. As for the shields, there is no solder to melt. You can just peel/pry them off. I hope this helps.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 2개:

Thanks Shane. I appreciate your help. I'm assuming that you missed a 0 on the numbers and meant 0.012 * 0.006? Being the second smallest? Not being cocky, I just like to be absolutely clear.

sean 의 2022년 11월 27일

@sean No problem. And yeah, thanks for the correction.

Russell Repair Co. 의 2022년 11월 28일

댓글 달기

Huawei P30 Pro

Smd parts on the main board p30 pro

답변 1개

귀하의 답변을 추가하세요