Charging/DC internal barrel broken on SRS-BTX300

The best thing you can do here is measure the height and width of the jack and type into eBay or Amazon (your measurements here) DC in Barrel Jack and find the closet one to what you have

This sort of job requires soldering so if your not comfortable with that sort of stuff you could take it to a local repair shop that does soldering and have them do it for you:-)

You could also replace the board in the pictures

Hopefully this helps

Any questions please ask

Thanks:-)

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 7개:

Got a quote online of £38, which is right at the top end of what I'm prepared to pay given that you can now pick the speaker up for £50-60.

Found the relevant barrel socket online for approx £7, but I don't have the requisite soldering skill. Soldering is on my list of skills to acquire.

The white connectors on the small board appear to be removable. However I've tried to pull them off with no success and I am reluctant to force them as they might be soldered. So that rules out replacing it in one piece.

Currently trying to find a local electronic repair shop on a few local groups, but they seem few and far between.

Steve Brough 의 2023년 1월 10일

@Steve Brough

Not trying to sound creepy or anything but where about are you in the world

It’s so I can try and find you somewhere local:-)

HelloMacOS 의 2023년 1월 10일

@hellomacos Creep 😂😂😂😂😂

[deleted] 의 2023년 1월 10일

@strongbow 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

HelloMacOS 의 2023년 1월 10일

I had thought it would reveal as much in the post. Unfortunately not. (It's my first time on here) 😂

I'm in Manchester UK. .... Thank you.