[ Solved] Panic Full i2c0 CheckBusStatus SCL is stuck low issue

Question

iPhone XS Max

2018년 9월 21일 출시. Models A1921, A2101, A2102, A2104. GSM 또는 CDMA / eSIM 또는 nano-SIM / 64, 256, 또는 512GB / 은색, 금색 또는 스페이스 그레이. ("iPhone 10 S Max"로 발음합니다.)

20 질문 전체 보기 | 42 부품 둘러보기

Kiyoshi @kiyoshi1407

평판: 33

2

1

게시됨: 2023년 1월 10일

옵션

[ Solved] Panic Full i2c0 CheckBusStatus SCL is stuck low issue

So with my iPhone when plugged in to charge and turn off the screen, about 20-30 seconds later it won't be able to turn on anymore, force me to unplug the charger to make it power on and show apple logo, even plugging in lightning to 3.5mm adapter will make it suddenly shutdown. Does anyone here know if this panic full is related to hardware or software failure?

Solved: I replaced the charging port and it actually fixed that problem

답변되었습니다! 답변 보기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요

점수 1

댓글 1개

Mine is will keep restarting its self but if am charging and using the phone it wont restart its self but if I drop the phone it will start turning off and on by itself continuously

iPhone XS

Please any how can I solve it

Akinyemi 의 2025년 3월 7일

댓글 달기

답변 1개

선택된 해법

Jerry Wheeler @dadibrokeit

평판: 83.2k

132

67

103

게시됨: 2023년 1월 10일

옵션

Hi Kiyoshi,

The panic log you've posted is showing that an I2C bus clock line is stuck low somewhere. I2C0 goes to the wide angle camera, the battery connector and the charge port assembly, and a couple other places. So yes, this is a hardware failure.

We saw the same error on an iPhone XR a year or so ago, and in that case it turned out to be the charging port flex assembly. That's where I'd start, with replacing that.

SOLVED: iPhone Xr randomly bootloop at random moment - iPhone XR - iFixit

이 답변이 도움이 되었나요?

예 아니요

점수 3

댓글 5개:

@flannelist, you helped out on that previous issue; does it look likely this is the same problem?

Jerry Wheeler 의 2023년 1월 10일

@dadibrokeit I could swear I posted a response to this, but I guess not.

I would also add the "sensor flex" at the top of the display to your list of i2c0 components.

It's definitely in the same family of problems. "Stuck low" could mean there's a short on that line. And unfortunately, a short in one place means a short on the whole line. So any of the included parts, or the board itself could be at fault.

I was hoping the panic might specify a specific problem part, but it does not. Either way, I think charge port is a reasonable start. Even opening the device, disconnecting the charge port flex cable from the logic board (after disconnecting the battery of course) and then trying to power on (after reconnecting the battery) could help to confirm. Although that may not help, if the battery is not charging properly either. You can rinse and repeat with the other items on the list as well if the charge port isn't the issue.

Alisha C 의 2023년 1월 10일

@flannelist Good point, rather than starting with randomly replacing parts, definitely a better idea to try and isolate the fault first. Another set of eyes always helps, so thanks!

Jerry Wheeler 의 2023년 1월 10일

It's strange that when I disconnect the flex sensor, even though it loses face id, true tone and auto brightness, suddenly it no longer shuts down when charging. Maybe I found a solution by replacing the flex sensor assembly

Kiyoshi 의 2023년 1월 10일

@kiyoshi1407 There's a thread on Reddit about a XS (not Max) where they're saying there are a couple of different ways to get Face ID back; apparently if you jailbreak your phone you can read out the Face ID information and reprogram it into a new flex cable, or you can desolder the dot illuminator and move it to a new cable. Depends on what's wrong with your existing one; if it's the flex cable then the second option would be feasible, but if your dot projector has crapped out then you'd need to go with the first one.

https://www.reddit.com/r/mobilerepair/co...

Jerry Wheeler 의 2023년 1월 11일

댓글 달기

Mine is will keep restarting its self but if am charging and using the phone it wont restart its self but if I drop the phone it will start turning off and on by itself continuously

iPhone XS

Please any how can I solve it — Akinyemi
@flannelist, you helped out on that previous issue; does it look likely this is the same problem? — Jerry Wheeler
@dadibrokeit I could swear I posted a response to this, but I guess not.

I would also add the "sensor flex" at the top of the display to your list of i2c0 components.

It's definitely in the same family of problems. "Stuck low" could mean there's a short on that line. And unfortunately, a short in one place means a short on the whole line. So any of the included parts, or the board itself could be at fault.

I was hoping the panic might specify a specific problem part, but it does not. Either way, I think charge port is a reasonable start. Even opening the device, disconnecting the charge port flex cable from the logic board (after disconnecting the battery of course) and then trying to power on (after reconnecting the battery) could help to confirm. Although that may not help, if the battery is not charging properly either. You can rinse and repeat with the other items on the list as well if the charge port isn't the issue. — Alisha C
@flannelist Good point, rather than starting with randomly replacing parts, definitely a better idea to try and isolate the fault first. Another set of eyes always helps, so thanks! — Jerry Wheeler
It's strange that when I disconnect the flex sensor, even though it loses face id, true tone and auto brightness, suddenly it no longer shuts down when charging. Maybe I found a solution by replacing the flex sensor assembly — Kiyoshi
@kiyoshi1407 There's a thread on Reddit about a XS (not Max) where they're saying there are a couple of different ways to get Face ID back; apparently if you jailbreak your phone you can read out the Face ID information and reprogram it into a new flex cable, or you can desolder the dot illuminator and move it to a new cable. Depends on what's wrong with your existing one; if it's the flex cable then the second option would be feasible, but if your dot projector has crapped out then you'd need to go with the first one.

https://www.reddit.com/r/mobilerepair/co... — Jerry Wheeler

iPhone XS Max

[ Solved] Panic Full i2c0 CheckBusStatus SCL is stuck low issue

답변 1개

답변을 추가하세요