주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2694 질문 전체 보기

My iPhone 6s started smoking after I reconnected the screen

Hello!

i was going to replace the homebutton, so i switched off the phone, repaired it. then i started connecting screen and when i plugged one cable in, it started smoking. i was scared so i unpluged it. and plug again but this time with disconnected baterry. screen stopped working. idk if its problem of the phone or the lcd, its any way to fix this? (Phone actally truns on but without display, can check with the dnd button)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

you didnt disconnect the battery the first time so you have probably blown the backlight filter on the logic board, if you shine a light on the screen you will probably see the image but you won't have backlight until its repaired

해당 답변은 도움이 되었습니까?

점수 3
댓글 달기

As Daniel says, you've killed the back-light filters on the motherboard. I don't know if you followed a guide but the first thing you must do on any device is disconnect the battery. Even if you try a new screen the chances are it still won't work. You'll need to find somewhere that does micro soldering to have the filters replaced.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

NameProfile.exe 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 7

전체 시간: 83