기기를 수리하세요 커뮤니티 상점

The Valve Index Base Station is a device used to track the position of virtual reality headsets and controllers. It uses infrared technology to accurately track the location of VR equipment in a room, allowing for a more immersive and responsive VR experience.

2 질문 전체 보기

옵션

What type of connector is used for the base station power cable?

The cable going between the wall wort and the base station had the connector snap in the wall wort. It's a small two prong adapter with a plastic flange that seems like it'd be relatively simple to re-solder if I could find a spare, but I have no idea how to find it. A name or a purchase link would be fantastic. To be clear I am referring to the plug on the other end of the cable from the barrel plug. I believe it is some kind of molex connector?


Female:

Block Image


Male (this is the part I need to replace):

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 2개

A pic would be super helpful

의

Updated with photos. I've done some more digging and I think it might be a molex micro-connect

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 해법

옵션

This is most likely a molex connector, as you have pointed out.

As far as I can tell, this should be part number 436450200 which you can view and also get a 3D model of on their official website.

해당 답변은 도움이 되었습니까?

예 아니요
점수 3

댓글 1개:

PS: Had the same issue on mine. I feel like this was a very bad design choice...

의

댓글 달기

귀하의 답변을 추가하세요

Walter Gray (Shenanigans) 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 39

전체 시간: 529