주요 콘텐츠로 건너뛰기

A1708/EMC 3164 — 2017년 6월 출시, 이 기본 레벨 MacBook Pro는 (OLED Touch Bar가 아닌) 기존의 function keys를 유지합니다.

565 질문 전체 보기

mac installation fails and restarts after selecting disk

I'm trying to do a fresh macOS installation on my 2017 macbook pro but it freezes when the progress bar starts, then "your computer restarted because of a problem" message shows up and restarts. Same happens when I try to restore using time machine. Ps: I have the lcd cable disconnected.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

Are you in recovery mode? You should try erasing and re formatting your disk, and then reinstalling macOS.

해당 답변은 도움이 되었습니까?

점수 0

댓글 3개:

I have done all the above but it still fails. Could it be the usb-c hub I'm using? I tried a different yet similar hub today and it still failed.

Try changing that… It could also be a thermal issue. Make sure you have the back cover on your Mac; that acts as a heat spreader.

@ryan39167 - This series doesn’t use the case as a heat spreader/sink. If offers a proper heatsink and fan.

댓글 달기

@chillin_otb - What happens after you connect the display back in & any other parts, minus the bottom cover. Then with the charger plugged in restart the system and pressing the D key to enter into diagnostics. Are you able to get that far and running diagnostics did you get any errors? If you did tell us what you got.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Chillin Otb 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 28