Lenovo Yoga 9 14ITL5 No turn on
the laptop will not turn on. there is 3.5v at one of the pins for the connector for the ribbon cable that goes to the on/off button. is there a schematic available to show how i can jumper the connector to emulate a button press.
better MB pic
Update (05/18/23)
ok i posted the pics. the first is the MB, the second is the C port power connections , and the SMD fuses were not open.
third is the button board. on/off. fourth is where I tested for the 3.5v
좋은 질문 입니까?
점수
0
@outthere90479 we need to know what motherboard you have. It could be a NM-C841 Check on the board itself.
Post some pictures of where you measured the voltage and what your board looks like 기존 질문에 이미지 추가하기
oldturkey03 의