기기를 수리하세요 커뮤니티 상점

The Meta Quest 2 (formerly Oculus Quest 2) was released in October 2020 and is the successor to the Oculus Quest.

165 질문 전체 보기

옵션

What sensors in the Meta Quest 2 controllers control hand tracking?

I am in the process of repairing meta quest 2 controllers at the moment, and I keep running into an issue where I replace the joystick on the controller, but then I go to test it afterwards and my thumb just hovers on the joystick and will not move unless I actuate another button. My thumb just jumps back to the stick after a different button press. It doesnt track my thumb hovering on the A or B buttons either, only when I actually press the buttons is when my thumb will stop hovering on the joystick.

What sensors inside of these controllers control the "hand tracking" while using the controller? I have ran into this issue with the rear trigger as well.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 2
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

There are built-in sensors in the buttons, sticks, triggers and thumb rests that track finger movement. I’m guessing that either you used an aftermarket joystick that doesn’t have the right sensors, you installed it incorrectly, or the joystick is defective. Does the thumb rest (the little rough pad thing on the controller) still detect when your thumb is on it?

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 2개:

Do you mean in the actual plastic buttons/triggers there are sensors?

The thumb rest does not detect my thumb moving over to it.

의

I’m not sure if the sensor is in the button itself, or if it’s directly beneath the button. It might work sort of like how the Nintendo Switch NFC reader works, where the reader just happens to be underneath the joystick, but the sensors very well might actually be part of the buttons.

의

댓글 달기

귀하의 답변을 추가하세요

Abraham Honenheim 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 26

전체 시간: 332