iPhone 13 mini restarting, SMC PANIC - ASSERTION

Question

iPhone 13 mini

Released on September 24th 2021, the iPhone 13 mini is a smaller version of Apple's iPhone 13 and is the second mini iPhone. It features a 5.4-inch OLED, an A15 Bionic processor, and dual rear cameras.

31 질문 전체 보기

Banana Joe @bananajoe76861

평판: 25

1

게시일: 2023년 7월 30일

옵션

iPhone 13 mini restarting, SMC PANIC - ASSERTION

Please help me with this error, i tried to reinstall the IOS but no changes.

It has a screen changed and the rear, front camera doesn't work. I bought today as it is.

Can be any chances by the screen causing restarts ?

I read some articles that can be the Charger cable flex thing or proximity sensor flex , but i'm not sure. :(

I disconnected the charger cable flex and keep restarting.

panic(cpu 0 caller 0xfffffff02b8469ac): SMC PANIC - ASSERTION FAILED: target/d16/target.cpp:263: 0, SMC BSC failure, spreadsheet ver(*10) 190

S.sensor array 0 - 6 is 0x0, 0x400, 0x0, 0x0, 0x0, 0x0, 0x0

F.sensor array 0 is 0x0

- Misc(2) OUTBOX1 not ready

ASSERTION FAILED: target/d16/target.cpp:263: 0, SMC BSC failure, spreadsheet ver(*10) 190

S.sensor array 0 - 6 is 0x0, 0x400, 0x0, 0x0, 0x0, 0x0, 0x0

F.sensor array 0 is 0x0

#

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 2

댓글 1개

what d u do?

koosta 4822 의 2023년 12월 18일

댓글 달기

답변 1개

Alisha C @flannelist 평판: 32.9k 25 35 32 · Answer 1 · 2023-07-30T09:15:58-07:00

가장 유용한 답변

Alisha C @flannelist

평판: 32.9k

25

35

32

게시일: 2023년 7월 30일

옵션

There's a whole section on this panic on the iPhone Kernel Panics page, but in summary, you're on the right track.

Panic Assertion failed is usually related to some sensor that isn't checking in with the System Management Controller (SMC).

The unfortunate part is that the sensor in your panic points to an issue with the logic board. The x400 sensor is specific to the iPhone 13 mini. The logic board for any iPhone X or new (save the XR and the 2020 and 2022 SE variants) has a stacked logic board. It's really two separate boards sandwiched together.

The x400 sensor is on the bottom board. Usually something like that would be caused by bend, or substantial drop. There could be a break in the connection between the boards, or an issue with the bottom board itself. That will require soldering and some very specialized tools to repair.

If the device is still under warranty, be sure to check with Apple. If it's not otherwise damaged, this should be covered.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

iPhone 13 mini

iPhone 13 mini restarting, SMC PANIC - ASSERTION

답변 1개

귀하의 답변을 추가하세요