주요 콘텐츠로 건너뛰기

닌텐도 스위치는 도킹 스테이션을 통해 TV에서 플레이하거나 이동 중에도 플레이할 수 있는 휴대용 게임 콘솔입니다. 2017년 3월 3일 출시되었습니다.

707 질문 전체 보기

Why my switch has a black screen but sounds?

Hi guys. I need help my nintendo switch boots up normally and shows signal from the dock but the screen is on it is backlit but it doesn't show any image plus the digitizer works because if i click something it makes sound. can you help me? It started doing this when I tried to fix the front frame and when I put it back this happened. Thank you in advance for your reply.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 2개

My switch is on but the screen is just black and no light is coming from it can you help

@jacobmunguia has any repairs been done to it or has it been opened

댓글 달기

답변 1개

가장 유용한 답변

There are two connectors for the screen, one is for the digitizer and the other is for the LCD. It sounds like you got the digitizer plugged back in correctly, but I'm guessing the LCD flex cable isn't seated quite right. Here's the cable you should be checking.

Block Image

You'll need to open the Switch back up and check that connector. There are two little tabs on either side that should both be butted up against the connector itself; if they're uneven or not inserted all the way you could well have video image problems.

Take a look at that and let us know what you find.

Update (08/31/23)

There is a second LCD connector that could conceivably be causing problems if it isn't in all the way.

Block Image

If you hold a flashlight up to the screen, can you see any image? If so, that would indicate that the backlight is out for some reason. On smartphones it wasn't unusual to blow the backlight circuit either on the LCD or on the logic board if you plugged and unplugged it with the battery connected, but as far as I know that hasn't been a big issue with the Switch so far.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

Hi thanks for responding so quickly I've already checked that connector I've reattached and unplugged it at least four times but strangely it always doesn't go the contacts seem fine because even though I haven't used a microscope. Because it's my first time repairing, I don't have access to this tool. what else do you think it could be?

Still nothing of i hold a flashlight nothing dunno what's appening🤷

댓글 달기

귀하의 답변을 추가하세요

pierfrancotorsiello@gmail.com 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 23

7일 전: 187

30일 전: 1,058

전체 시간: 6,027