해결됨: no sound control after reassembling - iPhone 4

no sound control after reassembling

Hey,

i changed the display assembly of my iphone 4. Therefor i used your step by step instructions. But i forgot to activate the sleepbotton. I recognized it during the repairation and activated the sleepbotten then.

But after finishing the repairation the more-loudness control button is not working. When i push and hold the plus-button it even minimizes the loundness. But i can still change the loundness by displaymovements, while i´m listening to music.

I hope the there´s a solution for my problem and you can help me.

게시일: 2012년 2월 28일

옵션

Did you follow this take apart guide?

I recommend verifying that the connector for the volume buttons is properly seated. That's the one highlighted in yellow on page 6, step 17.

Since the unit is largely functional now, I believe you didn't cause any damage by forgetting to power it down. Disconnecting the battery (step 5) took care of this for you! :-)

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Pretty good.

I did exactly what you told me. And it Works.

I try that before but i took off the wrong connector.

Thank you very much.

stef an 의 2012년 2월 29일

댓글 달기

iPhone 4

no sound control after reassembling

답변 1개