기기를 수리하세요 커뮤니티 상점

Model A2159, EMC 3301. A refresh of the entry-level 13" MacBook Pro. Available in Silver and Space Gray. Released July 2019.

113 질문 전체 보기

옵션

Replaced screen only to break "ZIF data power connector"

I was given an 2019 A2159 MacBook Pro with an broken screen, I was able to use the laptop after I removed the screen pluged-in via USBC-HDMI, and also it ran on battery without its screen. Once I replaced the screen, the battery no longer works, the culprit being I broke the ZIF connector lid for the battery data cable

Block Image

https://imgur.com/a/JI4AsTh

The thing is, I'm sure I broke that piece off on my first go.. only for it to not work upon the screen install. I don't have any electronics expertise to diagnose this further.

  1. Can I source a replacement ZIF or ZIF clamp? I'll have a professional solder it on if need be.
  2. Any chance something else could have gone wrong, and its just a coincidence?

Update (09/11/23)

Block Image

https://imgur.com/a/yIEPMKl

Closer up photo

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

@thomasmulford - The latch is replaceable if that’s what went on a one way trip in the process of unlatching it. I can’t tell if that’s the issue based on the image.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 3개:

Please add some better photos of what you think you broke.

의

@thomasmulford - Not good 😫 while it’s a bit clearer I think the main shell is damaged so replacing the latch won’t help you here.

This will require someone with good micro soldering skills and a small nozzled hot air station to replace the connector.

의

Thanks Dan! I'll look around for business who can solder it!

의

댓글 달기

귀하의 답변을 추가하세요

Thomas Mulford 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 49