주요 콘텐츠로 건너뛰기

Apple은 MacBook Air 13"를 2017년 6월에 새로운 Broadwell Intel Core i5 프로세서로 업데이트하여 성능과 배터리 수명을 약간 향상시켰습니다.

423 질문 전체 보기

Power Cable and Battery

I have been trying to find answers for this for the last few weeks.

I have a 2017 MacBook Air with the I7 processor. I’m on my second battery and second charger cord with this computer.

The first battery died after only about 500 cycles. The new battery had 289 cycles and the full charge capacity is (mAh): 6543.

My first charger started to brown close to the MagSafe Connector. I have also noticed that when the cord gets pretty hot when I’m charging the computer. I can hold the MagSafe but it is on the verge of being too hot.

I have also noticed that the left corner computer gets warm while in use. I have taken it apart and dusted it. I have also upgraded the thermal paste. I’m wondering if it is my I/O board that is the culprit.

I do need to add, I have also reset the SMC.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

A common issue this series suffered was damage from using a knockoff charger. What happens is the comparator logic gets damaged which allows the charger to over charge or in the case of the knockoff charger the charger doesn’t lower or stop charging. That explains why your battery swelled and could explain why the fresh battery is not working properly.

This will need someone with micro soldering skills and access to the SMD parts that are damaged.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

That is not what I wanted to hear.

Can you recommend an article about this? I am trying to do some research to weigh my options.

Here’s an example MacBook not charging battery, logic board repair

All of the MacBooks share the same charging design

댓글 달기

귀하의 답변을 추가하세요

DMCLCC 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 2

전체 시간: 46