기기를 수리하세요 커뮤니티 상점

1 질문 전체 보기

옵션

If you do not connect the ribbon cable does it kill the keyboard?

I was doing some repairs to my keyboard. It was working great, I needed to install the middle frame so I re-disconnected the ribbon cable and assembled everything, upon reassembling I forgot to connect the ribbon cable before connecting the battery, I realized the mistake, disconnected the battery connected the ribbon cable, and the keyboard acted like it was charging but was losing battery rapidly, pulled everything back apart checked the connections again and found that the connections were good but the device slowly died, and would not take a charge.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

It might have. I forgot to connect a cable in my old iMac and it killed the whole device. Then again, not all devices are the same. When you reconnected the cable and tested it, did it connect? Try keeping it plugged in, and see if you can connect it to your computer using a wired connection .

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

Might the keyboard reset will work?

  1. Turn off and on the keyboard
  2. Press the following key combinations - Esc+O (release) Esc+O (release) Esc+B
  3. All Easy Switch light will blink continuously, wait for channel 1 to fast blink.
  4. Turn off and on the keyboard to complete the reset process
  5. If the Easy Switch does not blink, please repeat the above steps again

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Marcello Bachechi 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 14

30일 전: 24

전체 시간: 122