주요 콘텐츠로 건너뛰기

This unit cools or heats the water it circulates through the ChiliPad mattress pad. Model: CP-CUBE

16 질문 전체 보기

Anyone know thermistor part details?

Does anyone know the specs or replacement part on the thermistor? Mine went bad and I've currently just wired in a resistor to keep it working, but I'd like to be able to control the temperature again with a working thermistor.

Tech support on their end wasn't helpful. :(

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Took a gamble Amazon and found a workable one:

https://www.amazon.com/dp/B07LGMXTKK

Description:

uxcell 2 Pcs 10K NTC Thermistor Probe 15.7 Inch Epoxy Sensitive Temperature Temp Sensor for Air Conditioner

I think the main thing is just finding a 10K NTC thermistor that is waterproof (thus Epoxy in this case).

After putting it in, water temperature was +/- 1 degree off what my thermapen registered. Not bad for $5.49 for two of them!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Jerry Stevenson 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 14

전체 시간: 46