옵션

Screen backlight blinking when turning on iMac, then returns to normal

Guys, I have this imac late 2009, what happens is that when I turn it on, the backlight blinks for a few seconds, then the screen works perfectly for hours, however, when I turn on the computer with the screen brightness at maximum, the backlight it has more difficulty staying lit, so I need to turn it off and on again until it manages to stay lit, when I turn off the Mac with the lowest brightness, I can turn it on again.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 1개

@ramonferre18311 all you have to do is measure the output voltages on CN3. If those stay stable, you know it's your backlight strips. If they don't, you know it's your LED board.

oldturkey03 의 2023년 12월 8일

댓글 달기

게시일: 2023년 12월 5일

옵션

A common issue in this series is the LED driver board needing repair or replacement here's the guide to get to it iMac Intel 21.5" EMC 2308 LED Driver Board Replacement Often the MOSFET's or capacitors need replacing.

Here's one source for the part iMac 21.5" LED Backlight Board Apple P/N 661-5304

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thank you very much! I was thinking that it could be a problem with the power supply or the LCD backlight itself when it was turned on, but now I feel confident buying a new backlight board. When the new LCD board arrives I will complement the answer.

Ramon Ferreira 의 2023년 12월 6일

댓글 달기

iMac Intel 21.5" EMC 2308

Screen backlight blinking when turning on iMac, then returns to normal

답변 1개

귀하의 답변을 추가하세요