기기를 수리하세요 커뮤니티 상점

오랫동안 기다려온 인기 MacBook Air의 참신한 업데이트는 Intel Core i5 프로세서, Retina 화면 업데이트, 그리고 기타 수 많은 변경 및 업데이트를 포함합니다. 2018년 11월 7일에 출시되었습니다.

149 질문 전체 보기

옵션

Display is working at only at about 60 degrees angle.

On my Macbook Air 2018, the display goes entirely blank when i pull the lid to a normal viewing angle of 90 degrees. But the laptop is working as I can see the keyboard lights as well as listen to any background music being played. Surprisingly, if i lift the screen till about 60 degrees it works. I took it to the apple service centre and they say the entire display module has to be changed, they said the eDP connector looks fine.

A third party repair shop guy says it's a flexcable issue. Is this really a flexcable issue? Should I ask the apple service centre guys to check the flexcable? Or, is the flexcable just another name for eDP cable?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

This can be a bit confusing! There are five cables. The eDP cable only jumps across from the main logic board to the T-CON board which is that flopping circuit board which has four cables. The two larger cables are the LCD driver fanout from the T-CON. One of the smaller ones is your backlight power feed and the other is the camera connection.

Chech out the middle image in Step 10 here MacBook Air 13” Retina Display Late 2018 Display Replacement where you can see the five cables.

Sadly, your backlight cable has been damaged which is why the display needs replacing. It’s these four cables which are flexing every time you open and close the lid. Sometimes a good bang along the edge can damage things as well.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Aman Agrawal 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 12