My Oled tv doesn´t turn on after bezel was bent,

Question

LG Television

Repair guides and support for your LG TV.

1350 질문 전체 보기

Ágúst Ingvarsson @agust1984

평판: 1

게시일: 2024년 1월 11일

옵션

My Oled tv doesn´t turn on after bezel was bent,

Hi

I recently acquired an LG oled TV (OLED55CX6LA) for free. The tv won´t turn on after

the bezel around the screen was dented (very small dent!).

The TV only goes to standby and when I try to turn it on the relay clicks once and it goes back to standby. I tried disconnecting the four panel connectors to the T-con board one by one to no effect. I then disconnected the lower cable connecting the main board to the t-con board and then turned on the tv. Still no picture but the relay didn´t click when the cable was disconnected.

Any ideas on what the issue might be?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

Ilpakka @ilpakka 평판: 13 2 · Answer 1 · 2024-01-11T05:20:08-07:00

가장 유용한 답변

Ilpakka @ilpakka

평판: 13

2

게시일: 2024년 1월 11일

옵션

At first this sounded like a possible power supply issue but since there was no relay click after you disconnected the mainboard I would suggest you check for any damages on your mainboard and your T-board. I believe the issue might be revealed there. Maybe the dent caused minor but critical damage?

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Hi, thank you for answering. I will take them out and let somebody look at them (I have very limited experience with electronic repair).

Ágúst Ingvarsson 의 2024년 1월 11일

댓글 달기

LG Television

My Oled tv doesn´t turn on after bezel was bent,

답변 1개

귀하의 답변을 추가하세요