I replaced my screen following a tutorial and it was pretty easy. However, when I put the charger in to reboot it the laptop chimes but the display won’t show, it’s just blank navy blue. Any help is appreciated, thanks
좋은 질문 입니까?
평판: 4.5k
8
12
3
Are you able to boot into Recovery Mode or use an external monitor? If you can't get a picture doing either of those things you could try an SMC reset and a PRAM reset. If it's still happening after doing all that and you can't get a picture then my best guess would be that there is an issue with the display you installed or how you installed it. Good luck!
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 1
30일 전: 6
전체 시간: 26
