옵션

Question about damaged JDM-050 motherboard

Hi,
I got an old DS4 motherboard that has been scratched badly. The previous owner told me the controller worked before he tried to fix a stick drift problem, hence the scratches. I tried to assemble the parts together and get some LED blinking, but the controller did not work.

I'm quite inexperienced in this, so I hope someone could help me take a look if this board could still be restored to working condition or if it is totally dead. I found that a component next to the left thumbstick (zoom-in pic with arrow) might be deformed/melted. Maybe it is also a problem?

Many thanks :D

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 1개

Yeah...no that's been killed.

Wicker 의 2024년 4월 19일

댓글 달기

게시일: 2024년 4월 20일

옵션

So...you have what looks like at least 3 vias that are destroyed. That component in pic 3 looks like a diode and yeah it looks toasted. Also in the first pic, right side see the golden number 4 in a circle? If you go a bit up from there it's hard to say for sure but looks like there might be a damaged trace.

Diode replacement, verifying and fixing that trace, bypassing/restoring those vias.......all doable, but definitely not a job for a beginner. However!!! She's dead at this point, therefore it's the perfect place for a beginner to start learning! Nothing to lose.

I'd start with watching some videos on running enameled wire to repair the via's. If you can manage that part the rest will be easy.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Hey, thank you very much! I will try them out. Cheers! :D

kanelbulle_00 의 2024년 4월 21일

댓글 달기

DualShock 4 CUH-ZCT2

Question about damaged JDM-050 motherboard

답변 1개

귀하의 답변을 추가하세요